KINJOYA EPI
Epoxy Intermediate Coating

Excellent leveling ability: Can effectively fill small flaws, pits, and cracks on the substrate after primer application, making the floor surface more smooth and even.  

High strength and toughness: The paint film is tough, with good mechanical strength, flexibility, wear resistance, and impact resistance, capable of withstanding significant loads and impacts.  

Good compatibility: Bonds firmly with primer and topcoat layers, highly compatible, effectively ensuring the stability and durability of the entire flooring coating system.  

Chemical resistance: Has excellent resistance to salt spray, acids, alkalis, salts, and solvents, able to adapt to various complex chemical environments.

Base surface treatment: After the primer is completely cured, the base surface is polished, the floating dust, particles and raised parts on the surface are removed, and after cleaning, the flatness of the base surface is checked, and the existing potholes and cracks are repaired.

Material preparation: Stir the main agent of the middle coating evenly, add the curing agent according to the specified ratio, stir thoroughly, and then add an appropriate amount of quartz sand or quartz powder and other auxiliary materials according to the construction requirements, and continue to stir evenly.

Coating construction: use batch scraping, roller coating or spraying for construction, if quartz sand is added, it can be coated into a flat and dense layer of a certain thickness with trowels; If the patch is carried out, follow the order of scraping the coarse quartz mortar first, and then scraping the fine quartz mortar, and it needs to be polished and flattened after scraping and patching.

Curing and polishing: After the middle coating construction is completed, wait for it to be completely cured (usually 4-8 hours), polish the surface to remove the batch marks and particles, and clean it up, and then the top coating can be carried out.

Store in a dry, cool, and ventilated warehouse, keeping the temperature at 5-25℃, and avoid exposure to rain or direct sunlight. 

Buckets should be stored upside down to prevent moisture absorption and deterioration. 

Keep away from fire and heat sources, in accordance with hazardous material storage standards. 

Unused materials should be sealed; in humid environments, nitrogen protection is recommended. 

All information is nominal values at the time of manufacturing, and related performance properties are based on the "as manufactured" condition. Actual values may vary depending on application methods, substrate conditions, environmental factors, and specific product configurations.