JOYA FN EZSHIELD
High Strength Water Based Rubber Asphalt Exposed Waterproof Coating

Name: JOYA FN EZSHIELD
Brand: KINJOYA CORPORATION LIMITED

JOYA FN EZSHIELD waterproof coating is a high-performance, single-component water-based waterproof coating independently developed. It is primarily made of liquid rubber materials and combined with anti-aging agents, additives, and pigments, resulting in a highly elastic and heat-resistant coating suitable for exposed waterproofing applications.

General Inquiries

Application

Key Benefits

Install Guide

Storage

JOYA FN EZSHIELD Application

It is suitable for roofing projects, underground projects, repair and maintenance of new buildings.
Additionally, it is ideal for waterproofing and sealing treatment of irregular building parts and detailed areas.

JOYA FN EZSHIELD Key Benefits

It is single-component, and ready-to-use straight from the container for efficient application.
The coating has a dense, uniform texture and can be applied by roller, spray, or trowel, easily achieving the desired thickness with three coats to meet standard requirements.
The dry membrane has high strength, allowing for non-stick feet during construction and facilitating subsequent operations.
Being asphalt-based, it is highly compatible with asphalt coiled materials, providing excellent full adhesion; when used with self-adhesive asphalt coiled materials, the entire process can be done without heat.
No primer required, it repairs the water-migration resistance ofthe base layer.
High elongation rate, crack resistance

JOYA FN EZSHIELD Install Guide

Surface preparation: Ensure the concrete surface is flat, clean, dry, and free of oil stains. Cracks or depressions should be repaired and leveled with mortar.
Coating application: Use rolling, brushing, or troweling methods to evenly apply the primer on the surface, ensuring consistent thickness and allowing the material to fully wet the concrete substrate.
Application thickness: For each 0.5mm layer, wait for the coating to dry before applying the next layer until the design thickness is achieved.

JOYA FN EZSHIELD Storage

The suitable temperature for storage and transportation is between 5°C and 40°C. Products should be stored in a cool and ventilated place.
Please protect products from sunlight,rain and fire.
All information is nominal values at the time of manufacturing, and related performance properties are based on the "as manufactured" condition. Actual values may vary depending on application methods, substrate conditions, environmental factors, and specific product configurations.

Get in Touch with KINJOYA Now!



sales@kinjoya.com



Phone

+8613683660591



Address