KIN PLUME DR is an epoxy adhesive specifically designed for PVC waterproof membranes. It is used to bond PVC waterproof membranes to vertical and horizontal surfaces of various common building materials.
Supporting equipment for PVC membrane installation
Durable bonding: Chemically compatible with PVC membranes, forming a permanent waterproof layer.
Stable performance: Temperature range from -20℃ to 80℃.
Water-resistant, heat-resistant, acid-resistant, alkali-resistant, and corrosion-resistant; long-term use without easily yellowing or delaminating.
Clean the base thoroughly, ensuring it is free of cracks, level, and without debris.
Apply an even coat on both the base and the back of the waterproofing membrane, then let it stand for 5-10 minutes until it is no longer sticky to the touch.
Normally, lay the waterproofing membrane onto the base, pressing out air as you go.
Use a double-seam welding process for overlapping edges to ensure the overlaps are secure.
Store in a cool, dry place, protected from the action of sunlight and rain.
Do not store at temperatures below 41℉(5°C) or above 104℉（40℃）.
All information is nominal values at the time of manufacturing, and related performance properties are based on the "as manufactured" condition. Actual values may vary depending on application methods, substrate conditions, environmental factors, and specific product configurations.
