KIN NANOLIA PRIMER
High-Performance Acrylic Alkali-Resistant Sealing Primer

Name: KIN NANOLIA PRIMER
Brand: KINJOYA CORPORATION LIMITED

KIN Nanolia Primer is a dedicated sealing primer specially formulated for the aerogel insulation thick coating system. It is meticulously manufactured using high-performance acrylic emulsion and sealing additives, offering excellent alkali resistance, sealing properties, penetration, and adhesion. It effectively seals the capillaries of the substrate, prevents efflorescence, mottling, and water penetration, significantly enhances the bond strength of the intermediate/topcoat of the aerogel system, and improves the overall durability of the system. It is suitable for various exterior wall substrates such as cement mortar, concrete, and putty.

General Inquiries

Application

Key Benefits

Install Guide

Storage

KIN Nanolia Primer Application

Specifically designed for priming and sealing exterior wall substrates within the aerogel insulation thick coating system. It is also suitable for sealing treatment on exterior wall substrates such as cement mortar, concrete, and putty in residential buildings, office buildings, and factories.

KIN Nanolia Primer Key Benefits

Superior alkali resistance and sealing properties, effectively preventing efflorescence and whitening of the wall surface.
High penetrating power, reinforcing the compactness and strength of the substrate.
Excellent adhesion, ensuring interlayer bonding of the aerogel coating system.
Water-resistant yet breathable, delaying coating aging and chalking.
Easy application with fast drying, matching the application rhythm of the aerogel system.

KIN Nanolia Primer Install Guide

Substrate Preparation: The substrate must be solid, dry, smooth, and free from dust and oil stains. Moisture content<10%, pH<10. Loose areas must be repaired.
Application Method: Apply by roller, brush, or spray. Stir thoroughly before use.
Dilution Ratio: Dilute with clean water ≤10%.
Application Conditions: 5-35°C, RH≤85%. Avoid rain, snow, wind, condensation.
Drying Time: Surface dry ~1h, hard dry ~4h. Wait 24h before aerogel intermediate/topcoat.
Coverage: 8-12 m²/kg per coat.

KIN Nanolia Primer Storage

Store in a cool, dry place in sealed containers above 0°C. Keep away from heat sources and children. Shelf life: 12 months.
All information is nominal values at the time of manufacturing, and related performance properties are based on the "as manufactured" condition. Actual values may vary depending on application methods, substrate conditions, environmental factors, and specific product configurations.

Get in Touch with KINJOYA Now!



sales@kinjoya.com



Phone

+8613683660591



Address