KIN PLUME DR is a synthetic PVC-P membrane obtained by co-extrusion.
KIN PLUME DR membranes are naturally fire resistant, they self-extinguish and resist the spread of flame.
Designed for waterproofing building structures, including walls, foundations, and planter boxes, with primary applications in industrial, commercial, and residential roofing systems.
KIN PLUME DR features high tensile strength, high elongation, low shrinkage, good flexibility at low temperatures, and long service life
KIN PLUME DR membranes are naturally fi re resistant, they self-extinguish and resist the spread of flame.
On the main surface, KIN PLUME DR is fully adhered or mechanical fastened, and always laid to run a few centimetres on the parapet.
KIN PLUME DR membrane is fastened around the perimeter of the roof and around any protruding features with bars or adapted screws and plates. At the top of the upstands, KIN PLUME DR is heat welded on strip mechanically fastened onto the substrate. The overlaps are heat welded using a leister automatic welder or a hot air gun.
Store the product upright in a cool warehouse, retaining inner supports. Keep it on pallets with the original protective film intact. Stack no more than two pallets high, using dunnage between layers for isolation.
Protect from direct sunlight, heat sources, freezing temperatures, organic solvents, and physical impact.
The product is suitable for long-term storage when these conditions are maintained.
All information is nominal values at the time of manufacturing, and related performance properties are based on the "as manufactured" condition. Actual values may vary depending on application methods, substrate conditions, environmental factors, and specific product configurations.
